|
| |
|
SURLY PUGSLEY FRAMESET |
Surly Pugsley Mountain Frame
The premise behind Pugsley’s design is based on the allowance of tires with
a larger-than-average footprint. It was created to go where other bikes may
flounder. The fork will accept 4" tires on 26" rims. The floatation and
traction gained by using large-volume, low-pressure tires (we highly
recommend the Surly Endomorph 3.7 tires) can get you over and through
otherwise-unrideable terrain: ice, snow, sand, mud, wet rocks and roots. In
many conditions, bigger is better.
Who should ride Pugsley? Beach/desert riders, snow/ice riders,
wilderness explorers, and anybody else in need of a bike that will provide
extra stability, traction, and floatation when the terrain gets loose and
unpredictable. If you fall into any one of those categories, you should ride
a Pugsley. -
The Surly Pugsley Mountain Frame is
a Sport Utility Bicycle that goes where other bikes dare not tread. -
Accepts massive Large Marge rims and 26x4.0 tires (RI407A01 ) -
Will run linear pull brakes if used with Large Marge rims -
Accommodates 4"-wide tires on 26" rims. Designed to provide increased
stability, floatation, and traction on varied terrain. -
TIG-welded double-butted Surly 4130 CroMoly frame with rear-loading
horizontal dropouts and derailleur hanger. International standard disc
tab and removable cantilever pivots, spaced 120mm apart, foruse with
Surly Large Marge rims. -
Includes
straight-blade tapered suspension-corrected (447mm axle to crown) 4130
CroMoly fork. Spaced 135mm at the dropouts to accept a rear hub. -
Features 120mm-spaced removable canti pivots, rear international
standard disc tab, 1-1/8" threadless steerer, and single dropout
eyelets. - Frame and fork dropouts are spaced at 135mm
and offset 17.5mm, to the drive side, to compliment a wider chainline
created by the use of a 100mm bottom bracket shell. Equal spacing and
offset, of the fork and frame, allow front and rear wheels to
interchange.
- Braze-ons: Eyelets for fenders, upper and
lower rear rack mounts, top-tube and seatstay guides for use with
continuous shifter and brake housing, dual water bottle bosses
-
Component specs: 27.2mm seatpost, 30.0mm Constrictor seatpost clamp
(included), 100mm bottom bracket shell, top-pull E-type front
derailleur, 135mm hub, 22-32-44t chainring clearance, 1-/8" threadless
headset
- 135mm hub spacing front and rear
-
Includes adapter for building offset wheels
- Uses
rear disc caliper adapters front and rear
-
Wheels need to be built with 17.5mm offset (reverse dished)
-
Specially drilled Large Marge rims specifically recommended for Pugsleys
(offset requires offset drilling of spoke holes) *Adapter tool for
building offset wheels comes with each Pugsley frame.
-
Front Derailleur Clamp: E-Type
- Front Derailleur Cable
Pull: Top
- Front Derailleur Style: Topswing
-
Fork Rake: 100mm
- Brake Type: Linear Pull - Disc
-
Wheel Size: 26"
- Headset Type: 1-1/8" Standard Cups
-
BB Shell Width: 100mm
- Disc Mount Type: 51mm I.S. Rear
-
Front Hub Spacing: 135 mm
- Rear Hub Spacing: 135mm
-
Material: 4130 CroMoly
- Steerer Tube: 1-1/8" Threadless
-
BB Thread Type: English
- Seatpost: 27.2 mm
-
Note use the special Large Marge rims to give you more disc-side dish
and more even spoke tension. Use these special, asymmetrically-drilled
(6mm offset) Large Marge rims on the Pugsley. Non-Surly rims, intended
for use in Pugsley wheelsets, should be drilled 6-12mm offset to the
drive side.
MEASUREMENTS / Measurements Key
| |
| 16 in. |
18 in. | 20 in. |
22 in. | |
| |
| | |
ST (C-T)
Inches
mm
|
16.0
406.4
|
18.0
457.2
|
20.0
508.0
|
22.0
558.8
| |
| |
| |
TT (C-C)
Inches
mm
|
21.8
552.5
|
22.4
569.5
|
23.1
587.3
|
24.0
608.6
| |
| |
| |
TT (Effec.)
Inches
mm
|
22.9
580.9
|
23.5
595.7
|
24.0
610.1
|
24.6
625.0
| |
| |
| |
HT Angle
degrees |
70.5° | 70.5° |
70.5° | 70.5° |
| |
| |
|
ST Angle
degrees |
72.0° | 72.0° |
72.0° | 72.0° |
| |
| |
|
BB Drop
Inches
mm |
2.2
55.0
|
2.2
55.0
|
2.2
55.0
|
2.2
55.0
| |
| |
| |
CS Length
Inches
mm |
17.6
448.1
|
17.6
448.1
|
17.6
448.1
|
17.6
448.1
| |
| |
| |
Wheel Base
Inches
mm |
42.0
1067.3
|
42.6
1082.3
|
43.2
1097.3
|
43.8
1112.6
| |
| |
| |
S.O. Height*
Inches
mm |
30.8
782.2
|
32.0
811.6
|
33.3
845.8
|
34.5
875.8
| |
| |
| |
HT Length
Inches
mm |
4.0
102.0
|
4.3
110.0
|
5.1
130.0
|
5.9
150.0
| |
| |
| |
FK Length
Inches
mm |
17.6
447.0 |
17.6
447.0 |
17.6
447.0 |
17.6
447.0 | |
| |
| |
FK Rake
Inches
mm |
1.7
43.0 | 1.7
43.0 | 1.7
43.0 |
1.7
43.0 | |
| |
| |
Weight
lbs. |
5.56 | 5.66 |
5.88 | 6.1 |
| |
| |
|
*Standover height measured using Surly Endomorph 3.7" tire measuring
740mm in diameter.
|
Price: 575.00
|
|
|
FBM BITCHIN CAMARO BMX FRAME |
FBM Bitchin Camaro BMX Frames |
For 2006 we have upgraded the Bitchin Camaro to the SS model. The updated
frame comes standard with a Mid Bottom Bracket, a new lighter weight
externally machined headtube, dimpled chainstays for improved crank arm
clearance, round tube bridges and capped seat and chain stays. | | | |
FRAME SPECS | |
Colors |
Red, Yellow | |
TT Length |
20.5", and 21.25" | |
Rear End Length |
14" to 15-1/4" | |
BB Height |
11.75" | |
HT Angle |
74 degrees | |
ST Angle |
71 degrees | |
Weight |
4.2 pounds (21.25tt) | |
Headtube |
Integrated Externally Machined | |
Dropouts |
Heat treated 1/8 " thick for 3/8" axles | |
Bottom Bracket |
Mid | |
Brakes |
Seatstay Cantilever | |
Cable Guides and Stops |
Split guides on top tube | |
Bridges |
Round Tube for chain and seat stays | |
Capped Stays |
Yes | |
Standover Height |
7-3/4" | |
TUBING SPECS all 4130 Chromoly | |
Top Tube |
1 3/8” O.D.; .049 WALL | |
Down Tube |
1 3/8 ” O.D.; .035 WALL | |
Seat Stays |
5/8” O.D.; .035 WALL | |
Chain Stays |
7/8” O.D.; .049 WALL |
Price: 322.00
|
|
|
WHEELS MANUFACTURING CHAINSTAY PROTECTOR |
Manufacturing Clear chainstay protector
Clear chainstay protector kit, bag/10
Price: 28.66
|
|
|
CYCLE STUFF STAY WRAP |
Cycle Stuff Stay-Wrap Black
Price: 6.50
|
|
|
LIZARD SKINS FRAME PATCH KIT |
Lizard Skins Carbon leather frame patch
kit - Adhesive, pack of six, Black
Price: 7.50
|
|
|
LIZARD SKINS FRAME PATCH KIT |
Lizard Skins Clear skin frame patch kit -
Polyurethane, pack of six
- Adhesive
- Dimensions
1.5" x 1"
Price: 5.95
|
|
|
SURLY 1X1 FRAME AND FORK W/DISC TABS |
The Surly 1x1 Single-Speed Frame Set
includes a suspension-corrected rigid fork with ISO disc tabs and removable
cantilever pivots. Constructed of sturdy 4130 chromoly tubing for a lifetime
of singlespeed fun. |
Color | Black | |
Fork Rake | 45 mm | |
Axle to Crown Length | 413 mm | |
Crown Race | 30.0 | |
Steerer Tube Length | 260 mm | |
Brake Type | Linear Pull - Canti,Disc | |
Wheel Size | 26" | |
Headset Type | 1-1/8" Standard Cups | |
BB Shell Width | 73 mm | |
Frame Size | 14 cm | |
Disc Mount Type | 51mm I.S. Rear | |
Fork Travel | 80-100 mm | |
Front Hub Spacing | 100 mm | |
Rear Hub Spacing | 135 mm | |
Front Axle Type | 9x1 | |
Weight | 2267 g | |
Material | 4130 CroMoly | |
Steerer Tube | 1-1/8" Threadless | |
Brake Usage F/R | Rear | |
BB Thread Type | English | |
Seatpost | 27.2 mm | |
Rear Axle Type | 10x1 |
MEASUREMENTS / Measurements Key
| |
|
x-small |
small |
medium |
large |
x-large |
|
|
|
| |
ST (C-T)
Inches
mm
|
14.0
355.6
|
16.0
406.4
|
18.0
457.2
|
20.0
508.8
|
22.0
558.8
|
|
|
|
|
TT (C-C)
Inches
mm
|
20.5
521.2
|
21.3
541.6
|
22.3
565.8
|
23.1
586.5
|
23.9
608.3
|
|
|
|
|
TT (Effec.)
Inches
mm
|
21.5
545.0
|
22.2
565.0
|
23.0
585.0
|
23.6
600.0
|
24.2
615.0
|
|
|
|
|
HT Angle
degrees |
71.0° |
71.0° |
71.0° |
71.0° |
71.0° |
|
|
|
|
ST Angle
degrees |
73.0° |
73.0° |
73.0° |
73.0° |
73.0° |
|
|
|
|
BB Drop
Inches
mm |
1.7
42.5
|
1.7
42.5
|
1.7
42.5
|
1.7
42.5
|
1.7
42.5
|
|
|
|
|
CS Length
Inches
mm |
16.5
419.0
|
16.5
419.0
|
16.5
419.0
|
16.5
419.0
|
16.5
419.0
|
|
|
|
|
Wheel Base
Inches
mm |
39.9
1013.5
|
40.7
1034.0
|
41.5
1054.3
|
42.1
1070.1
|
42.7
1085.8
|
|
|
|
|
S.O. Height**
Inches
mm |
28.1
714.9
|
29.2
742.9
|
30.5
773.8
|
31.8
806.9
|
33.1
841.6
|
|
|
|
|
HT Length
Inches
mm |
3.5
89.0
|
4.0
102.0
|
4.5
114.0
|
5.3
134.0
|
6.3
159.0
|
|
|
|
|
FK Length
Inches
mm |
16.3
413.0 |
16.3
413.0 |
16.3
413.0 |
16.3
413.0 |
16.3
413.0 |
|
|
|
|
FK Rake
Inches
mm |
1.8
45.0 |
1.8
45.0 |
1.8
45.0 |
1.8
45.0 |
1.8
45.0 |
|
|
|
|
Weight
lbs. |
4.20 |
4.42 |
4.96 |
5.00 |
5.40 |
|
|
|
|
** Measurements use tire with diameter of 676 mm (Tioga™ 2.1 DH),
and taken from middle of top-tube to level ground.
| | |
Price: 415.00
|
|
|
SURLY STEAMROLLER FRAME AND FORK |
| The Steamroller frame/fork kit is the perfect
way to get into fixed gear riding. Ideal for messenger, winter training for
road riders, and it can even handle the velodrome should you choose.
Features horizontal dropouts spaced to 120mm (fixed gear standard) to
accept the large variety of track hubs on the market |
Color | Charcoal Pearl | |
Fork Rake | 38 mm | |
Axle to Crown Length | 375 mm | |
Crown Race | 30.0 | |
Steerer Tube Length | 320 mm | |
Brake Type | Road Caliper - Standard
Reach | |
Wheel Size | 700c | |
Headset Type | 1-1/8" Standard Cups | |
BB Shell Width | 68 mm | |
Frame Size | 49 cm | |
Front Hub Spacing | 100 mm | |
Rear Hub Spacing | 120 mm | |
Front Axle Type | 9x1 | |
Weight | 848 g | |
Material | CroMoly | |
Steerer Tube | 1-1/8" Threadless | |
Brake Usage F/R | Front | |
BB Thread Type | English | |
Seatpost | 27.2 mm | |
Rear Axle Type | 10x1 |
MEASUREMENTS / Measurements Key
| |
|
49cm |
53cm |
56cm |
59cm |
62cm |
|
|
|
| |
ST (C-T)
Inches
mm
|
19.3
490.0
|
20.9
530.0
|
22.0
560.0
|
23.2
590.0
|
24.4
620.0
|
|
|
|
|
TT (C-C)
Inches
mm
|
20.7
526.5
|
21.5
547.0
|
22.4
568.0
|
23.1
587.0
|
23.9
608.0
|
|
|
|
|
TT (Effec.)
Inches
mm
|
20.8
529.5
|
21.5
547.0
|
22.4
568.0
|
23.1
587.0
|
23.9
608.0
|
|
|
|
|
HT Angle
degrees |
72.5° |
73.0° |
73.5° |
74.0° |
74.0° |
|
|
|
|
ST Angle
degrees |
74.5° |
74.0° |
73.5° |
73.0° |
73.0° |
|
|
|
|
BB Drop
Inches
mm |
2.8
70.0
|
2.8
70.0
|
2.8
70.0
|
2.8
70.0
|
2.8
70.0
|
|
|
|
|
CS Length
Inches
mm |
15.7
398.0
|
15.7
398.0
|
15.7
398.0
|
15.7
398.0
|
15.7
398.0
|
|
|
|
|
Wheel Base
Inches
mm |
38.0
965.7
|
38.1
966.6
|
38.5
978.6
|
38.9
987.6
|
39.7
1009.1
|
|
|
|
|
S.O. Height*
Inches
mm |
29.5
748.5
|
30.7
780.5
|
31.8
807.9
|
32.9
835.2
|
34.1
865.3
|
|
|
|
|
HT Length
Inches
mm |
3.3
83.0
|
4.3
109.0
|
5.4
136.0
|
6.4
163.0
|
7.7
196.0
|
|
|
|
|
FK Length
Inches
mm |
14.8
375.0 |
14.8
375.0 |
14.8
375.0 |
14.8
375.0 |
14.8
375.0 |
|
|
|
|
FK Rake
Inches
mm |
1.5
38.0 |
1.5
38.0 |
1.5
38.0 |
1.5
38.0 |
1.5
38.0 |
|
|
|
|
Weight
lbs. |
4.02 |
4.24 |
4.46 |
4.51 |
4.75 |
|
|
|
|
*Measurements use tire with outer diameter of 682 (700c x 28), and
taken from the middle of top-tube to level ground | | |
Price: 410.00
|
|
|
LOOK KG 461/451/361 DROPOUT |
Derailleur hanger/dropout for LOOK KG
461/451/361 road bikes.
Price: 20.00
|
|
|
KHS XC504 DER HANGER |
Get back on the trail with this handy
replacement derailleur hanger from KHS. Fits 2003 model year XC504
bicycles.Also fits other KHS frames with identical hanger specs, such as the
2003 XC904.
Price: 10.00
|
|
|
LIZARD SKINS CHAINSTAY PROTECTOR |
| Protects your frame from scratches and dents.
Helps quiet that nasty chain slap. Please refer to photo for sizing
information.
Price: 7.00
|
|
|
LIZARD SKINS SHOCK BOOTS |
Made of stretchable neoprene that fits most air
and coil rear shocks. Heavy duty stitching allows the product to have a cut
to fit design. Proper use will prolong the life of your shock and protect
against premature wear.
Price: 8.00
|
|
|
JENSONUSA $300 MONEY CARD |
Price: 300.00
|
|
|
JENSONUSA $5 MONEY CARD |
Price: 5.00
|
|
|
JENSONUSA $10 MONEY CARD |
Price: 10.00
|
|
|
JENSONUSA $25 MONEY CARD |
Price: 25.00
|
|
|
VELO 1947 WORLD CHAMPIONSHIP POSTER |
1947 World Championship Poster. Velo Press
Cycling Posters, classic images from the 1920's -1950's.
-
Posters printed on heavy duty 111 lb weight paper
- Width: 24
ins
- Height: 36 ins
Price: 34.23
|
|
|
1943 VUELTA CICLISTA A CATALUNA POSTER |
1943 Vuelta Ciclista a Cataluna Poster 24x36".
Velo Press Cycling Posters features classic images from the 1920's -1950's.
-
Posters printed on heavy duty 111 lb weight paper
- Width: 24
ins
- Height: 36 ins
Price: 34.23
|
|
| |
|